CMakeLists.txt

@@ -83,7 +83,6 @@ add_executable(test_simplearchiver
     src/test.c
     src/parser.c
     src/helpers.c
-    src/archiver.c
     src/algorithms/linear_congruential_gen.c
     src/data_structures/linked_list.c
     src/data_structures/hash_map.c

README.md

@@ -20,15 +20,13 @@ API calls.
       Use "-f -" to work on stdout when creating archive or stdin when reading archive
       NOTICE: "-f" is not affected by "-C"!
     -C <dir> : Change current working directory before archiving/extracting
-    --compressor <full_compress_cmd> : requires --decompressor and cmd must use stdin/stdout
-    --decompressor <full_decompress_cmd> : requires --compressor and cmd must use stdin/stdout
+    --compressor <full_compress_cmd> : requires --decompressor
+    --decompressor <full_decompress_cmd> : requires --compressor
       Specifying "--decompressor" when extracting overrides archive file's stored decompressor cmd
     --overwrite-create : allows overwriting an archive file
     --overwrite-extract : allows overwriting when extracting
     --no-abs-symlink : do not store absolute paths for symlinks
     --temp-files-dir <dir> : where to store temporary files created when compressing (defaults to current working directory)
-    --write-version <version> : Force write version file format (default 1)
-    --chunk-min-size <bytes> : v1 file format minimum chunk size (default 4194304 or 4MiB)
     -- : specifies remaining arguments are files to archive/extract
     If creating archive file, remaining args specify files to archive.
     If extracting archive file, remaining args specify files to extract.

file_format.md

@@ -76,117 +76,3 @@ Following the file-count bytes, the following bytes are added for each file:
     1. 8 bytes 64-bit unsigned integer "size of filename in this archive file"
        in big-endian.
     2. X bytes file data (length defined by previous value).
-
-## Format Version 1
-
-File extension is "*.simplearchive" but this isn't really checked.
-
-First 18 bytes of file will be (in ascii):
-
-    SIMPLE_ARCHIVE_VER
-
-Next 2 bytes is a 16-bit unsigned integer "version" in big-endian. It will be:
-
-    0x00 0x01
-
-Next 4 bytes are bit-flags.
-
-1. The first byte
-    1. The first bit is set if de/compressor is set for this archive.
-
-The remaining unused flags in the previous bit-flags bytes are reserved for
-future revisions and are currently ignored.
-
-If the previous "de/compressor is set" flag is enabled, then the next section is
-added:
-
-1. 2 bytes is 16-bit unsigned integer "compressor cmd+args" in big-endian. This
-   does not include the NULL at the end of the string.
-2. X bytes of "compressor cmd+args" (length defined by previous value). Is a
-   NULL-terminated string.
-3. 2 bytes is 16-bit unsigned integer "decompressor cmd+args" in big-endian.
-   This does not include the NULL at the end of the string.
-4. X bytes of "decompressor cmd+args" (length defined by previous value). Is a
-   NULL-terminated string.
-
-The next 4 bytes is a 32-bit unsigned integer "link count" in big-endian which
-will indicate the number of symbolic links in this archive.
-
-Following the link-count bytes, the following bytes are added for each symlink:
-
-1. 2 bytes bit-flags:
-    1. The first byte.
-        1. The first bit is UNSET if relative links are preferred, and is SET if
-           absolute links are preferred.
-        2. The second bit is "user read permission".
-        3. The third bit is "user write permission".
-        4. The fourth bit is "user execute permission".
-        5. The fifth bit is "group read permission".
-        6. The sixth bit is "group write permission".
-        7. The seventh bit is "group execute permission".
-        8. The eighth bit is "other read permission".
-    2. The second byte.
-        1. The first bit is "other write permission".
-        2. The second bit is "other execute permission".
-2. 2 bytes 16-bit unsigned integer "link name" in big-endian. This does not
-   include the NULL at the end of the string. Must not be zero.
-3. X bytes of link-name (length defined by previous value). Is a NULL-terminated
-   string.
-4. 2 bytes is 16-bit unsigned integer "link target absolute path" in
-   big-endian. This does not include the NULL at the end of the string.
-5. X bytes of link-target-absolute-path (length defined by previous value).
-   Is a NULL-terminated string. If the previous "size" value is 0, then
-   this entry does not exist and should be skipped.
-6. 2 bytes is 16-bit unsigned integer "link target relative path" in
-   big-endian. This does not include the NULL at the end of the string.
-7. X bytes of link-target-relative-path (length defined by previous value).
-   Is a NULL-terminated string. If the previous "size" value is 0, then
-   this entry does not exist and should be skipped.
-
-After the symlink related data, the next 4 bytes is a 32-bit unsigned integer
-"chunk count" in big-endian which will indicate the number of chunks in this
-archive.
-
-Following the chunk-count bytes, the following bytes are added for each chunk:
-
-1. 4 bytes that are a 32-bit unsigned integer "file count" in big-endian.
-
-The following bytes are added for each file within the current chunk:
-
-1. 2 bytes that are a 16-bit unsigned integer "filename length" in big-endian.
-   This does not include the NULL at the end of the string.
-2. X bytes of filename (length defined by previous value). Is a NULL-terminated
-   string.
-3. 4 bytes bit-flags.
-    1. The first byte.
-        1. The first bit is "user read permission".
-        2. The second bit is "user write permission".
-        3. The third bit is "user execute permission".
-        4. The fourth bit is "group read permission".
-        5. The fifth bit is "group write permission".
-        6. The sixth bit is "group execute permission".
-        7. The seventh bit is "other read permission".
-        8. The eighth bit is "other write permission".
-    2. The second byte.
-        1. The first bit is "other execute permission".
-    3. The third byte.
-        1. Currently unused.
-    4. The fourth byte.
-        1. Currently unused.
-4. Two 4-byte unsigned integers in big-endian for UID and GID.
-    1. A 32-bit unsigned integer in big endian that specifies the UID of the
-       file. Note that during extraction, if the user is not root, then this
-       value will be ignored.
-    2. A 32-bit unsigned integer in big endian that specifies the GID of the
-       file. Note that during extraction, if the user is not root, then this
-       value will be ignored.
-5. A 64-bit unsigned integer in big endian for the "size of file".
-
-After the files' metadata are the current chunk's data:
-
-1. A 64-bit unsigned integer in big endian for the "size of chunk".
-2. X bytes of data for the current chunk of the previously specified size. If
-   not using de/compressor, this section is the previously mentioned files
-   concatenated with each other. If using de/compressor, this section is the
-   previously mentioned files concatenated and compressed into a single blob of
-   data.

src/archiver.h

@@ -40,7 +40,7 @@ typedef struct SDArchiverState {
   size_t digits;
 } SDArchiverState;
 
-typedef enum SDArchiverStateReturns {
+enum SDArchiverStateReturns {
   SDAS_SUCCESS = 0,
   SDAS_HEADER_ALREADY_WRITTEN = 1,
   SDAS_FAILED_TO_WRITE,
@@ -51,9 +51,8 @@ typedef enum SDArchiverStateReturns {
   SDAS_INTERNAL_ERROR,
   SDAS_FAILED_TO_CREATE_MAP,
   SDAS_FAILED_TO_EXTRACT_SYMLINK,
-  SDAS_FAILED_TO_CHANGE_CWD,
-  SDAS_INVALID_WRITE_VERSION
-} SDArchiverStateReturns;
+  SDAS_FAILED_TO_CHANGE_CWD
+};
 
 /// Returned pointer must not be freed.
 char *simple_archiver_error_to_string(enum SDArchiverStateReturns error);
@@ -66,46 +65,12 @@ void simple_archiver_free_state(SDArchiverState **state);
 int simple_archiver_write_all(FILE *out_f, SDArchiverState *state,
                               const SDArchiverLinkedList *filenames);
 
-int simple_archiver_write_v0(FILE *out_f, SDArchiverState *state,
-                             const SDArchiverLinkedList *filenames);
-
-int simple_archiver_write_v1(FILE *out_f, SDArchiverState *state,
-                             const SDArchiverLinkedList *filenames);
-
 /// Returns zero on success.
 int simple_archiver_parse_archive_info(FILE *in_f, int_fast8_t do_extract,
                                        const SDArchiverState *state);
 
-/// Returns zero on success.
-int simple_archiver_parse_archive_version_0(FILE *in_f, int_fast8_t do_extract,
-                                            const SDArchiverState *state);
-
-/// Returns zero on success.
-int simple_archiver_parse_archive_version_1(FILE *in_f, int_fast8_t do_extract,
-                                            const SDArchiverState *state);
-
 /// Returns zero on success.
 int simple_archiver_de_compress(int pipe_fd_in[2], int pipe_fd_out[2],
                                 const char *cmd, void *pid_out);
 
-/// If returns non-NULL, must be free'd.
-char *simple_archiver_filenames_to_relative_path(const char *from_abs,
-                                                 const char *to_abs);
-
-/// Gets the absolute path to a file given a path to a file.
-/// Should also work on symlinks such that the returned string is the path to
-/// the link itself, not what it points to.
-/// Non-NULL on success, and must be free'd if non-NULL.
-char *simple_archiver_file_abs_path(const char *filename);
-
-/// Used to validate a file in a ".simplearchive" file to avoid writing outside
-/// of current working directory.
-/// Returns zero if file is OK.
-/// Returns 1 if file starts with '/'.
-/// Returns 2 if file contains '../' at the start.
-/// Returns 3 if file contains '/../' in the middle.
-/// Returns 4 if file contains '/..' at the end.
-/// Returns 5 if "filepath" is NULL.
-int simple_archiver_validate_file_path(const char *filepath);
-
 #endif

src/main.c

@@ -97,8 +97,7 @@ int main(int argc, const char **argv) {
       int ret = simple_archiver_write_all(file, state, filenames);
       if (ret != SDAS_SUCCESS) {
         fprintf(stderr, "Error during writing.\n");
-        char *error_str =
-            simple_archiver_error_to_string((SDArchiverStateReturns)ret);
+        char *error_str = simple_archiver_error_to_string(ret);
         fprintf(stderr, "  %s\n", error_str);
       }
       fclose(file);
@@ -114,8 +113,7 @@ int main(int argc, const char **argv) {
       int ret = simple_archiver_write_all(stdout, state, filenames);
       if (ret != SDAS_SUCCESS) {
         fprintf(stderr, "Error during writing.\n");
-        char *error_str =
-            simple_archiver_error_to_string((SDArchiverStateReturns)ret);
+        char *error_str = simple_archiver_error_to_string(ret);
         fprintf(stderr, "  %s\n", error_str);
       }
     }
@@ -132,8 +130,7 @@ int main(int argc, const char **argv) {
       int ret = simple_archiver_parse_archive_info(file, 0, NULL);
       if (ret != 0) {
         fprintf(stderr, "Error during archive checking/examining.\n");
-        char *error_str =
-            simple_archiver_error_to_string((SDArchiverStateReturns)ret);
+        char *error_str = simple_archiver_error_to_string(ret);
         fprintf(stderr, "  %s\n", error_str);
       }
       fclose(file);
@@ -141,8 +138,7 @@ int main(int argc, const char **argv) {
       int ret = simple_archiver_parse_archive_info(stdin, 0, NULL);
       if (ret != 0) {
         fprintf(stderr, "Error during archive checking/examining.\n");
-        char *error_str =
-            simple_archiver_error_to_string((SDArchiverStateReturns)ret);
+        char *error_str = simple_archiver_error_to_string(ret);
         fprintf(stderr, "  %s\n", error_str);
       }
     }
@@ -161,8 +157,7 @@ int main(int argc, const char **argv) {
       int ret = simple_archiver_parse_archive_info(file, 1, state);
       if (ret != SDAS_SUCCESS) {
         fprintf(stderr, "Error during archive extracting.\n");
-        char *error_str =
-            simple_archiver_error_to_string((SDArchiverStateReturns)ret);
+        char *error_str = simple_archiver_error_to_string(ret);
         fprintf(stderr, "  %s\n", error_str);
       }
       fclose(file);
@@ -170,8 +165,7 @@ int main(int argc, const char **argv) {
       int ret = simple_archiver_parse_archive_info(stdin, 1, state);
       if (ret != SDAS_SUCCESS) {
         fprintf(stderr, "Error during archive extracting.\n");
-        char *error_str =
-            simple_archiver_error_to_string((SDArchiverStateReturns)ret);
+        char *error_str = simple_archiver_error_to_string(ret);
         fprintf(stderr, "  %s\n", error_str);
       }
     }

src/parser.c

@@ -156,11 +156,9 @@ void simple_archiver_print_usage(void) {
           "-C <dir> : Change current working directory before "
           "archiving/extracting\n");
   fprintf(stderr,
-          "--compressor <full_compress_cmd> : requires --decompressor and cmd "
-          "must use stdin/stdout\n");
+          "--compressor <full_compress_cmd> : requires --decompressor\n");
   fprintf(stderr,
-          "--decompressor <full_decompress_cmd> : requires --compressor and "
-          "cmd must use stdin/stdout\n");
+          "--decompressor <full_decompress_cmd> : requires --compressor\n");
   fprintf(stderr,
           "  Specifying \"--decompressor\" when extracting overrides archive "
           "file's stored decompressor cmd\n");
@@ -171,12 +169,6 @@ void simple_archiver_print_usage(void) {
   fprintf(stderr,
           "--temp-files-dir <dir> : where to store temporary files created "
           "when compressing (defaults to current working directory)\n");
-  fprintf(stderr,
-          "--write-version <version> : Force write version file format "
-          "(default 1)\n");
-  fprintf(stderr,
-          "--chunk-min-size <bytes> : v1 file format minimum chunk size "
-          "(default 4194304 or 4MiB)\n");
   fprintf(stderr,
           "-- : specifies remaining arguments are files to archive/extract\n");
   fprintf(
@@ -197,8 +189,6 @@ SDArchiverParsed simple_archiver_create_parsed(void) {
   parsed.working_files = NULL;
   parsed.temp_dir = NULL;
   parsed.user_cwd = NULL;
-  parsed.write_version = 1;
-  parsed.minimum_chunk_size = 4194304;
 
   return parsed;
 }
@@ -309,50 +299,11 @@ int simple_archiver_parse_args(int argc, const char **argv,
         out->temp_dir = argv[1];
         --argc;
         ++argv;
-      } else if (strcmp(argv[0], "--write-version") == 0) {
-        if (argc < 2) {
-          fprintf(stderr,
-                  "ERROR: --write-version expects an integer argument!\n");
-          simple_archiver_print_usage();
-          return 1;
-        }
-        int version = atoi(argv[1]);
-        if (version < 0) {
-          fprintf(stderr, "ERROR: --write-version cannot be negative!\n");
-          simple_archiver_print_usage();
-          return 1;
-        } else if (version > 1) {
-          fprintf(stderr, "ERROR: --write-version must be 0 or 1!\n");
-          simple_archiver_print_usage();
-          return 1;
-        }
-        out->write_version = (uint32_t)version;
-        --argc;
-        ++argv;
-      } else if (strcmp(argv[0], "--chunk-min-size") == 0) {
-        if (argc < 2) {
-          fprintf(stderr,
-                  "ERROR: --chunk-min-size expects an integer argument!\n");
-          simple_archiver_print_usage();
-          return 1;
-        }
-        out->minimum_chunk_size = strtoull(argv[1], NULL, 10);
-        if (out->minimum_chunk_size == 0) {
-          fprintf(stderr, "ERROR: --chunk-min-size cannot be zero!\n");
-          simple_archiver_print_usage();
-          return 1;
-        }
-        --argc;
-        ++argv;
       } else if (argv[0][0] == '-' && argv[0][1] == '-' && argv[0][2] == 0) {
         is_remaining_args = 1;
       } else if (argv[0][0] != '-') {
         is_remaining_args = 1;
         continue;
-      } else {
-        fprintf(stderr, "ERROR: Got invalid arg \"%s\"!\n", argv[0]);
-        simple_archiver_print_usage();
-        return 1;
       }
     } else {
       if (out->working_files == NULL) {

src/parser.h

@@ -51,10 +51,6 @@ typedef struct SDArchiverParsed {
   const char *temp_dir;
   /// Dir specified by "-C".
   const char *user_cwd;
-  /// Currently only 0 and 1 is supported.
-  uint32_t write_version;
-  /// The minimum size of a chunk in bytes (the last chunk may be less).
-  uint64_t minimum_chunk_size;
 } SDArchiverParsed;
 
 typedef struct SDArchiverFileInfo {

src/test.c

@@ -23,7 +23,6 @@
 #include <string.h>
 
 // Local includes.
-#include "archiver.h"
 #include "helpers.h"
 #include "parser_internal.h"
 
@@ -242,27 +241,6 @@ int main(void) {
     free(out);
   }
 
-  // Test archiver.
-  {
-    __attribute__((
-        cleanup(simple_archiver_helper_cleanup_c_string))) char *rel_path =
-        simple_archiver_filenames_to_relative_path(
-            "/one/two/three/four/five", "/one/two/branch/other/path");
-    CHECK_STREQ(rel_path, "../../branch/other/path");
-    simple_archiver_helper_cleanup_c_string(&rel_path);
-
-    rel_path = simple_archiver_filenames_to_relative_path(
-        "/one/two/three/four/five", "/one/two/three/other/dir/");
-    CHECK_STREQ(rel_path, "../other/dir/");
-    simple_archiver_helper_cleanup_c_string(&rel_path);
-
-    CHECK_FALSE(simple_archiver_validate_file_path("Local/Path"));
-    CHECK_TRUE(simple_archiver_validate_file_path("/Abs/Path"));
-    CHECK_TRUE(simple_archiver_validate_file_path("Local/../../not/really"));
-    CHECK_TRUE(simple_archiver_validate_file_path("./../almost"));
-    CHECK_TRUE(simple_archiver_validate_file_path("strange/.."));
-  }
-
   printf("Checks checked: %u\n", checks_checked);
   printf("Checks passed:  %u\n", checks_passed);
   return checks_passed == checks_checked ? 0 : 1;